Ethernet Switches

Dasan Networks’ Layer 2 and Layer 3 Carrier and Enterprise Ethernet Switch Portfolio provides premium features and functionality with a comfortable cost structure. Delivering value and reliability, our industry-leading warranties and support programs reduce the total cost of ownership and embody DASAN’s commitment to quality.

A1100
Ethernet Switches / Aggregation / A1100 PDF
Overview
ftth DASAN Networks’ A1100 is a single slot Advanced Telecom Computing Architecture (ATCA) packet processing module/blade compliant with PICMG 3.0/ 3.1 (Option 1 & 9) interface specification. It is ideal for dual-star and full-mesh configurations in 14 slot (EIA cabinet) and 16 slot (ETSI cabinet) systems, it also provides Rear Transition Module (RTM) for fabric and base interface extension.
The base interface switch provides Gigabit Ethernet services on 15 base channels via ZONE 2 and 2 Fast Ethernet to the shelf managers. The fabric interface switch provides 10GbE (10GBase-KX4, XAUI) service on max 14 (min. 12) channels via ZONE 2 connectors.
The A1100 provides in-band and out-ofband access to RS232 console port and 10/100/1000Base-T Ethernet management port.
The main advantages of AdvancedTCA are high throughput, multi-protocol support, and high-power capability, hot swap ability, high scalability and integrated system management.
Features
• PICMG 3.0 compliant base interface switch
• PICMG 3.1, Option 1,9 fabric interface switch (1G/10G)
• Front Interface
- 4 x 1G/10G SFP+ (Base Interface)
- 4 x 1G/10G SFP+ (Fabric Interface)
• Rear Transition Module (RTM) Interface
- 4 x 1G/10G SFP+ (Fabric Interface)
- 2 x 1G SFP (Base Interface)
- 4 x SSU/BITS, RJ45
• Network timing for synchronization and clocking
• Full non-blocking multi-shelf system solution
• Removes issues of latency and delay in the time-sensitive voice applications
• Common & familiar CLI via console/telnet
• SNMPv2/v3, Alarms
• L2/L3/L4 classification / priority management
Specifications
Specification
SERVICE PROCESSOR • Freescale QorIQTM P2020, dual-core processor, 1.2GHz
• 1 x 10/100Base-T/TX update channel to redundant HUB
MEMORY • 2GB 400MHz ECC-protected SDRAM, via DDR3 memory VLP miniDIMM - Up to 4GB
• Dual 64MB NOS flash (NOR) and dual 8MB boot flash (NOR)
FABRIC INTERFACE • 320Gbps switch (BroadCom BCM56842)
• Fourteen ATCA Fabric ports for 1G/10G (PICMG 3.1 option1 & 9) payload nodes, individually selectable
• 1 x 10GbE Inter-Switch link (ISL) with redundant switch
BASE INTERFACE • 24-port 1GbE switch with 4 10GbE ports (BroadCom BCM56334)
• 10/100/1000Base-T/TX/T for all node slot in 14 or 16 slot chassis
• 1 x 1GbE Inter Switch Link (ISL)
• 2 x 10/100Base-T/TX to two Shelf Manager
FRONT PANEL INTERFACE I/O • Fabric Interface: 4 x 1G/10G SFP+
• Base Interface: 4 x 1G/10G SFP+
• 1 x 1G Ethernet (RJ-45) port on front panel for processor
• 1 x RS232 console port on front panel for processor
REAR TRANSITION MODULE (RTM) - A1100R • Fabric Interface: 4 x 1G/10G SFP+
• Base Interface: 2 x 1G SFP (optic & copper)
• Four BITS/SSU input or output Clock interface (RJ-45)
REGULATORY AND SAFETY • RoHS Compliant (6 of 6)
• FCC, UL, CE
• Designed to comply with NEBS
ENVIRONMENT • Operating temperature: 23~131°F (-5~55°C)
• Operating voltage: -39/72VDC
• Ambient Humidity: 5~90%
POWER CONSUMPTION • Maximum Power Consumption (with RTM): 107W
RELIABILITY • MTBF: >136,000 hours
Capabilities
L2 FEATURES • IEEE 802.1Q Virtual VLAN
• Port Mirroring
• VLAN Mirroring (Ingress)
• GVRP (GARP VLAN registration Protocol)
• IEEE 802.1 standard group addressing includes GMRP protocol
• Support Jumbo frames
• LAG (Link Aggregation) based on MAC or IP
• LACP (Link Aggregation Control Protocol)
• xSTP (STP compatible, PVRSTP, MSTP)
• Support Flow Control
• LLDP (Link Layer Discovery Protocol)
"
L3 FEATURES • FI switch L3 Routing LPM entries: IPv4 16K, IPv6 8K
• IGMPv3 snooping
• ARP, proxy ARP, RARP
• ICMP (Internet Control Message Protocol)
• Standard and extended Layer 2 and Layer 3 ACL
• VRF with static and dynamic routing (OSPF v2/3 for IPv4 and IPv6)
• Static, Uni-cast and Policy Based Routing
• OSPFv2/3 (Open Shortest Path First)
• BGP (Border Gateway Protocol) v4 for IPv4
• ECMP (Equal-cost multi-path)
• VRRPv2 for IPv4 and VRRPv3 for IPv6
• BFD (Bidirectional Forwarding Detection) on IPv4 and IPv6
QOS, PRIORITY
AND SEQURITY
FEATURES
• IEEE 802.1p frame priority
• IEEE 802.1SP Strict Priority Queuing
• WRR, WERR
• Diffserv
• srTCM/trTCM color marking and metering
• PFC, QCN, ETS
MANAGEMENT
FEATURES
• SNMP v1,v2,v3
• MIBs
• Serial and Telnet (CLI)
• TFTP client for remote SW upgrade
• SSH v2 Secure Shell Daemon
• NTP, NTPv2, v3 (Network Time Protocol)
IPMI
MANAGEMENT
MODULE (IPMC)
• IPMI v1.5, v2.0 compliant
• Voltage sensors for each power rail
• Thermal sensor for switch and LMP
• Current sensor for -48VDC
• Serial Over LAN (SOL)
• IPMI Over LAN (IOL)
• SAI-HPI-b.03.01 (FUMI, DIMI)
• ATCA 3.0 Compliant E-KEY function
• I2C FRU ROM
NETWORK TIMING
SYSTEM (NTS)
• Stratum-3 performance (3E optional)
• Automatic Fail-over
• Automatic configuration
• Master clock Active/Standby support
• Support Synchronization Status Message (SSM)
• Four BITS/SSU input or output (RJ-45)
• Timing reference: ITU-T G.812,813, GR-1244-CORE, G.703,
ETSI 300462,3
ATCA FORM
FACTOR
• Support both 14 and 16 slot Chassis
• Complies with ATCA cooling environment
• 8U form factor compliant to PICMG 3.0
• Single slot dimension: 11.024 x 12.677 in (280 x 322 mm)
• Standard ATCA LED suite
Network Configuration
Network configuration